TP-Link TL-WR720N TL-WR720N V1 User Guide - Page 13
The Rear Panel - setup
View all TP-Link TL-WR720N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
1.4.2 The Rear Panel TL-WR720N 150Mbps Wireless N Router Figure 1-2 Rear Panel sketch The following parts are located on the rear panel (View from left to right). ¾ WPS/RESET: This button is used for both WPS and Reset function. To use the WPS function, press it for less than five seconds; to use the RESET function, press it for more than five seconds. z Used as RESET button: There are two ways to reset to the Router's factory defaults: 1) Use the Factory Defaults function on System Tools -> Factory Defaults page in the Router's Web-based Utility. 2) Use the Factory Default Reset button: With the Router powered on, press and hold the RESET button (at least 5 seconds) until the SYS LED becomes quick-flash from slow-flash. Then release the button and wait the Router to reboot to its factory default settings. z Used as WPS button: WPS: If you have client devices, such as wireless adapters, that support Wi-Fi Protected Setup, then you can press this button to quickly establish a connection between the Router and client devices and automatically configure wireless security for your wireless network. ¾ POWER: The Power socket is where you will connect the power adapter. Please use the power adapter provided with this TL-WR720N 150Mbps Wireless N Router. ¾ WAN: The WAN port is where you will connect the DSL/cable Modem, or Ethernet. ¾ LAN (1-2): These ports connect the Router to the local PC(s). -5-