TP-Link TL-WR720N TL-WR720N V1 User Guide - Page 82
IP & MAC Binding - bandwidth control
View all TP-Link TL-WR720N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
TL-WR720N 150Mbps Wireless N Router Click Enable to enable this entry. Click the Clear button to clear a single entry. Click the Clear All button to clear all entries. Click the Save button to save all configurations. ) Note: 1. The conversion relation of bandwidth: 1Mbps = 1000Kbps. 2. Please choose the Network Connection Type and set the bandwidth according to your Network. If you are not clear about that, please contact with your ISP for help. 3. If no IP QoS item is enabled, the Bandwidth Apply won't be effective. 4. IP address range for different entries could not have intersection with each other. 5. After the configurations, click the Save button for the change to take effect. 4.14 IP & MAC Binding Figure 4-70 the IP & MAC Binding menu There are two submenus under the IP &MAC Binding menu (shown in Figure 4-70): Binding Settings and ARP List. Click any of them, and you will be able to scan or configure the corresponding function. The detailed explanations for each submenu are provided below. 4.14.1 Binding Settings This page displays the IP & MAC Binding Setting table; you can operate it in accord with your desire (shown in Figure 4-71). Figure 4-71 Binding Setting ¾ MAC Address - The MAC address of the controlled computer in the LAN. ¾ IP Address - The assigned IP address of the controlled computer in the LAN. -74-