Xerox 4500N Reference Guide - Page 116

Network Utility, AppleTalk, TCP/IP, EtherTalk, Address, Support, PhaserSMART Diagnostic Tool

Get Xerox 4500N - Phaser B/W Laser Printer PDF manuals and user guides View all Xerox 4500N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 116 highlights

Macintosh Mac OS X, Versions 10.1 and 10.2 Perform these steps only for Mac OS X, versions 10.1 and 10.2: 1. Open the Network Utility, then click the Ping tab. 2. Enter your printer's IP address. 3. Click Ping. If you do not get a response, confirm that your TCP/IP settings are correct for both your printer and computer. 4. For AppleTalk, follow the steps below. For TCP/IP proceed to Step 5. a. From the printer's front panel, verify that EtherTalk is enabled. If it is not, enable it in the front panel, then reset the printer. b. Print the "Configuration Page" and verify that EtherTalk is enabled. c. From the "Configuration Page", verify the Zone. If you have multiple zones on your network, verify that your printer appears in the desired zone. 5. If you are still unable to print, go to www.xerox.com/office/support or access PhaserSMART Technical Support through CentreWare Internet Services: a. Launch your web browser. b. Enter your printer's IP address in the browser's Address field (http:// xxx.xxx.xxx.xxx). c. Select Support. d. Click the PhaserSMART Diagnostic Tool link to access PhaserSMART. Phaser™ 4500 Laser Printer 3-35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
Macintosh
Phaser™ 4500 Laser Printer
3-35
Mac OS X, Versions 10.1 and 10.2
Perform these steps
only
for Mac OS X, versions 10.1 and 10.2:
1.
Open the
Network Utility
, then click the
Ping
tab.
2.
Enter your printer’s IP address.
3.
Click
Ping
. If you do
not
get a response, confirm that your TCP/IP settings are correct for
both your printer and computer.
4.
For
AppleTalk
, follow the steps below. For
TCP/IP
proceed to Step 5.
a.
From the printer’s front panel, verify that
EtherTalk
is enabled. If it is not, enable it in
the front panel, then reset the printer.
b.
Print the “Configuration Page” and verify that
EtherTalk
is enabled.
c.
From the “Configuration Page”, verify the
Zone
. If you have multiple zones on your
network, verify that your printer appears in the desired zone.
5.
If you are still unable to print, go to
www.xerox.com/office/support
or access
PhaserSMART Technical Support through CentreWare Internet Services:
a.
Launch your web browser.
b.
Enter your printer's IP address in the browser’s
Address
field (http://
xxx.xxx.xxx.xxx).
c.
Select
Support
.
d.
Click the
PhaserSMART Diagnostic Tool
link to access PhaserSMART.