Xerox 4500N Reference Guide - Page 163
Laser Safety, Phaser™ 4500 Laser Printer
View all Xerox 4500N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
The power cord is attached to the printer as a plug-in device at the back of the printer. If it is necessary to disconnect all electrical power from the printer, disconnect the power cord from the electrical outlet. Warning Do not remove the covers or guards that are fastened with screws unless you are installing optional equipment and are specifically instructed to do so. Power should be OFF when performing these installations. Except for user-installable options, there are no parts that you can maintain or service behind these covers. Note Leave the printer on for optimum performance; it does not pose a safety hazard. The following are hazards to your safety: ■ The power cord is damaged or frayed. ■ Liquid is spilled into the printer. ■ The printer is exposed to water. If any of these conditions occur: 1. Turn off the printer immediately. 2. Disconnect the power cord from the electrical outlet. 3. Call an authorized service representative. Laser Safety With specific regard to lasers, this printer complies with laser product performance standards set by governmental, national, and international agencies and is certified as a Class 1 Laser Product. The printer does not emit hazardous light because the beam is totally enclosed during all modes of customer operation and maintenance. Phaser™ 4500 Laser Printer A-2