Xerox 5500/YB User Guide - Page 118
Dynamic Methods of Setting the Printer's IP Address, Printer, Identification
UPC - 095205062236
View all Xerox 5500/YB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Connections and Internet Protocol (TCP/IP) Dynamic Methods of Setting the Printer's IP Address You can set the printer's IP address using any of the following methods. DHCP is enabled by default on all Phaser printers. ■ DHCP ■ CentreWare IS ■ AutoIP Information Required for Manual IP Addressing Information Internet Protocol (IP) address of the printer Network Mask Default Router/Gateway address Comments Format is xxx.xxx.xxx.xxx, where xxx represents a decimal number from 0-255. If you are unsure, leave this blank; the printer chooses an appropriate mask. Router address is required to communicate with the host device from anywhere other than the local network segment. Enabling DHCP on the Printer Verify that the printer DHCP protocol is enabled by setting the printer's front panel or by using CentreWare IS. DHCP is enabled by default on all Phaser printers. Note To determine the printer's IP address, select Printer Identification at the front panel. For information about the front panel, go to Reference/Features on the User Documentation CD-ROM. Phaser® 5500 Laser Printer 3-6