Xerox 5500/YB User Guide - Page 98

Custom Size Paper 8. In the printer driver: a. Select Properties, then select the Paper/Quality tab. b. Select either the paper type and custom size or the tray loaded with Custom as the paper source. 9. Click the OK button to print. Note If you replace the custom size in a tray with a non-custom size, be sure to set the new size in the front panel (or Auto Select for a size that is auto sensed). After Removing Custom Size Paper Selecting Front Panel Settings 1. At the printer's front panel, select Printer Setup, then press the OK button. 2. Select Paper Handling Setup, then press the OK button. 3. Select the Setup menu for this tray, then press the OK button. 4. Select Change Size, then press the OK button. 5. Select a paper type, then press the OK button. ■ Select a paper size from the list displayed, then press the OK button. ■ This selection should be Auto-Sensed for sizes that are sensed in this tray. If you are unsure if Auto-Sensed is selected, check the front panel. It should show the correct size on the "OK" line of the Setup menu. 6. Press the Back button one time, the press the OK button. Phaser® 5500 Laser Printer 2-66