Xerox 5500/YB User Guide - Page 222

Front Panel Messages Error or Warning Messages (Continued) Message Stapler Is Empty. Temperature Sensor Failure Toner Cartridge Failure Toner Is Low Tray [2 | 3 | 4 | 5 | 6] Failure Tray [2 | 3 | 4 | 5 | 6] is missing Tray [2 | 3 | 4 | 5 | 6] Paper Is Low. Tray [2 | 3 | 4 | 5] Failure Tray [2 | 3 | 4 | 5] Paper Guide Does Not Match Size Menu Tray 1 (MPT) Paper Guide Does Not Match Size Menu Description Replace the Staple Cartridge. Printing continues without stapling. 1. Open Door G. 2. Replace Staple Cartridge P/N 008R12941 above R1 area. 3. Close Door G. An error was detected in the temperature sensor. Print quality may be degraded. 1. Turn power off, then on. 2. If error continues, call Service. The Toner Cartridge has failed and it must be replaced. 1. Open the Printer Front Door. 2. Pull out the Toner Cartridge. 3. Replace with P/N 113R00668. 4. Close the Printer Front Door. The Toner Cartridge is almost empty. Order replacement P/N 113R00668. Open And Close Tray [2 | 3| 4 | 5 | 6]. An error was detected in Tray [2 | 3 | 4 | 5 | 6]. Printing continues using other input trays. 1. Open and close Tray [2 | 3 | 4 | 5 | 6]. 2. If error continues, call Service. Reinstall the indicated tray. The indicated tray is nearly empty. Reload the same size and type of paper soon. Open And Close Tray [2 | 3 | 4| 5]. An error was detected in Tray [2 | 3 | 4 | 5]. Printing continues using other input trays. 1. Open and close Tray [2 | 3 | 4 | 5]. 2. If error continues, call Service. 1. Check that the tray's paper guides are against the paper stack. 2. Set the tray's Change Paper Size menu to the size of paper in this tray. 1. Check that the Tray 1 (MPT) paper guides are against the paper stack. 2. Set the tray's Change Paper Size menu to the size of paper in this tray. Phaser® 5500 Laser Printer 4-69