Xerox 5500/YB User Guide - Page 221

Front Panel Messages Error or Warning Messages (Continued) Message Stacker Lower Tray Failure Stacker Upper Tray Is Full, Unload Paper Standard Output Tray Is Full, Unload Paper Staple Cartridge Is Low Or Missing Stapler Failure Stapler Failure Description An error was detected in the Stacker Lower Tray. Printing continues using the Standard Output Tray. 1. Turn power off. 2. Verify Finisher wire harnesses are properly connected by unplugging and reconnecting. 3. Turn power on. 4. If error continues, call Service. or 1. Remove the paper from the Stacker Lower Tray. 2. If error continues, turn power off. 3. Verify Finisher wire harnesses are properly connected by unplugging and reconnecting. 4. Turn power on. 5. If error continues, call Service. Remove the paper from the indicated output tray. Remove the paper from the indicated output tray. Install a Staple Cartridge. 1. Open Door G. 2. Insert Staple Cartridge P/N 008R12941 above R1 area. 3. Close Door G. An error was detected in the Stapler. Printing continues without stapling. 1. Turn power off. 2. Verify Finisher wire harnesses are properly connected by unplugging and reconnecting. 3. Turn power on. 4. If error continues, call Service. An error was detected in the Stapler. Printing continues without stapling. 1. Lift Door H and remove the paper. 2. Close Door H. 3. Open and close Door G. 4. If error continues, turn power off. 5. Verify Finisher wire harnesses are properly connected by unplugging and reconnecting. 6. Turn power on. 7. If error continues, call Service. Phaser® 5500 Laser Printer 4-68