Xerox 5500/YB User Guide - Page 132

Phaser® 5500 Laser Printer Windows NT 4.x This topic includes: ■ "Preliminary Steps" on page 3-20 ■ "Quick CD-ROM Install Steps" on page 3-20 ■ "Other Methods of Installation" on page 3-21 ■ "Windows NT 4.x Troubleshooting (TCP/IP)" on page 3-22 ■ "infoSMART Knowledge Base Documents (English only)" on page 3-23 Preliminary Steps These preliminary steps must be performed for all printers: 1. Verify that the printer is plugged in, turned On, and connected to an active network. 2. Verify that the printer is receiving network information by monitoring the LEDs on the back of the device or on the CentreDirect External Print Server. When the printer is connected to a functioning network and receiving traffic, its link LED is green, and its amber traffic LED is flashing rapidly. 3. Proceed to "Quick CD-ROM Install Steps" or "Other Methods of Installation" for the installation method desired. 4. Print a "Configuration Page" and keep it for reference. Quick CD-ROM Install Steps 1. Insert the Printer Installer and Utilities CD-ROM into the computer's CD-ROM drive. If the installer does not launch, do the following: a. Click Start, then click Run. b. In the Run window, type: :\INSTALL.EXE. 2. Select your desired language from the list. 3. Select Install Printer Driver. 4. Click I Agree to accept the Xerox Software License Agreement. 5. In the Select Printer dialog box, the default Use Walk-Up Technology (recommended for network printers) is selected. Click Next. 6. Follow the Use Walk-Up Technology instructions displayed. 7. Click Exit Program. Note If the Walk-Up Technology dialog box remains onscreen after you have completed Steps 1-6, click the Back button, then click Select from the following discovered printers. Follow the onscreen prompts to complete the installation procedure. For more information, go to the table of infoSMART Knowledge Base documents at the end of this section. Copyright © 2004 Xerox Corporation. All Rights Reserved. 3-20