Xerox 5500/YB User Guide - Page 231

Operational Guidelines ■ Do not block or cover the slots and openings on the printer. The printer may overheat without adequate ventilation. ■ For optimum performance, use the printer at elevations below 3,000 m (11,480 ft.). ■ Do not place the printer near a heat source. ■ Do not place the printer in direct sunlight. ■ Do not place the printer in line with the cold air flow from an air conditioning system. ■ Place the printer on a level, solid non-vibrating surface with adequate strength for the weight of the printer. It should be within 2° of horizontal with all four feet in solid contact with the surface. The base printer weight without any packaging materials is approximately 41 kg (90 lbs.). Printer Supplies ■ Use the supplies specifically designed for your printer. The use of unsuitable materials may cause poor performance and a possible safety hazard. ■ Follow all warnings and instructions marked on, or supplied with, the printer, options and supplies. Moving the Printer ■ Always use two people to lift the printer. 5500-267 ■ Always turn off the printer using the power switch and unplug all cables and cords. ■ Always lift the printer from the designated lift points. ■ Do not place any food or liquids on the printer. ■ Failure to repackage the printer properly for shipment can result in damage to the printer not covered by the warranty, service agreement, or Total Satisfaction Guarantee. ■ Damage to the printer caused by improper moving is not covered by the Xerox warranty, service agreement, or Total Satisfaction Guarantee. Note The Total Satisfaction Guarantee is available in the United States and Canada. Coverage may vary outside these areas; please contact your local representative for details. Phaser® 5500 Laser Printer A-4