Xerox 5500/YB User Guide - Page 80
Change, Transparency, Phaser® 5500 Laser Printer
UPC - 095205062236
View all Xerox 5500/YB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Transparencies 2. Insert the transparencies (long-edge feed preferred) into Tray 2, 3, 4, or 5. 5500-143 Note Do not load paper above the fill line inside the tray. 3. Adjust the paper guides to the size of the transparencies. 4. If prompted at the printer's front panel, press the OK button to accept the paper size and type that are highlighted. If you have changed the paper size or type, do the following: a. Select Change, then press the OK button. b. Select Transparency, then press the OK button. c. Select the paper size, then press the OK button to save your selection. 5. In the printer driver, select either Transparency as the paper type or the tray you loaded as the paper source. Phaser® 5500 Laser Printer 2-48
Transparencies
Phaser® 5500 Laser Printer
2-48
2.
Insert the transparencies (long-edge feed preferred) into Tray 2, 3, 4, or 5.
Note
Do not load paper above the fill line inside the tray.
3.
Adjust the paper guides to the size of the transparencies.
4.
If prompted at the printer’s front panel, press the
OK
button to accept the paper size and
type that are highlighted. If you have changed the paper size or type, do the following:
a.
Select
Change
, then press the
OK
button.
b.
Select
Transparency
, then press the
OK
button.
c.
Select the paper size, then press the
OK
button to save your selection.
5.
In the printer driver, select either
Transparency
as the paper type or the tray you loaded as
the paper source.
5500-143