Xerox 5500/YB User Guide - Page 140

Windows 98 and Windows Me Verifying Settings 1. Right-click Network Neighborhood on the desktop, then click Properties. 2. Click the Configuration tab. A list of installed network components appears for the following items: ■ Client for Microsoft networks ■ Xerox TCP/IP Port Monitor 3. If you are running CentreWare DP verify the following: ■ Novell Networks: You are required to load Novell IntraNetWare Client or Microsoft Client for IPX networks. ■ TCP/IP Networks: No additional software is required, but your printer must have a valid TCP/IP address assigned. 4. If any of the above protocols or services are not installed, install the necessary components and restart the system. When the system is restarted, return to this document. 5. Click Start, click Settings, then click Printers. The Printers window appears. 6. Right-click the printer icon, then click Properties. 7. Select the Details tab. 8. Verify the following: a. The printer driver name in the Print Using the Following Driver list. If necessary, reselect or install a new printer driver. b. The Port name in the Print to the Following Port list. If necessary, re-select the correct name. 9. Send a print job to the printer. If the printer does not print, access PhaserSMART Technical Support from the Troubleshooting tab of the Windows printer driver or go to www.xerox.com/office/support. infoSMART Knowledge Base Documents (English only) For more information, go to www.xerox.com/office/5500infoSMART to view these documents. Reference Name R100207118 Title Installing a Windows 98/Me printer driver Phaser® 5500 Laser Printer 3-28