Xerox 5500/YB User Guide - Page 223

Front Panel Messages Error or Warning Messages (Continued) Message Tray 4-5 Logic Board Failure Tray 4-5 Logic Board Failure Tray 6 Logic Board Failure Tray 6 Logic Board Failure Wrong Paper Size Load Tray [1 (MPT) | 2 | 3 | 4 | 5 | 6] with [size*] [type*] Wrong Paper Type Load Tray [1 (MPT) | 2 | 3 | 4 | 5 | 6] with [size*] [type*] Description An error was detected from the Tray 4-5 Unit Logic Board NVRAM memory. Printing continues using other input trays. 1. Turn power off, then on. 2. If error continues, call Service. An error was detected in the Tray 4-5 Logic Board communication. Printing continues using other input trays. 1. Turn power off. 2. Verify Tray 4-5 wire harness is properly connected by unplugging and reconnecting. 3. Turn power on. 4. If error continues, call Service. An error was detected in the Tray 6 Logic Board communication. Printing continues using other input trays. 1. Turn power off. 2. Verify Tray 6 wire harness is properly connected by unplugging and reconnecting. 3. Turn power on. 4. If error continues, call Service. An error was detected from the Tray 6 Logic Board NVRAM memory. 1. Turn power off, then on. 2. If error continues, call Service. Replace the paper in the indicated tray with paper of the indicated size and type. Replace the paper in the indicated tray with paper of the indicated size and type. Phaser® 5500 Laser Printer 4-70