Xerox 5500/YB User Guide - Page 97
Change, Custom, Custom Width W, Custom Height H, Arrow
UPC - 095205062236
View all Xerox 5500/YB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
3. Push the tray completely into the printer. Custom Size Paper 5500-065 4. If prompted at the printer's front panel, press the OK button to accept the paper size and type that are highlighted. If you have changed the paper size or type, do the following: ■ Select Change, then press the OK button. ■ Select Custom, then press the OK button.You are prompted to enter the custom width and custom height. Note When setting Custom Width (W) and Custom Height (H) on the front panel, verify that you are selecting the correct width and height values for the paper size and orientation (long-edge feed or short-edge feed). H W W H Long-Edge Feed 5500-153 Short-Edge Feed 5500-154 5. Select Custom Width (W), press the Up Arrow or Down Arrow button to select a value, then press the OK button. 6. Select Custom Height (H), press the Up Arrow or Down Arrow button to select a value, then press the OK button. 7. Press the Back button two times, the press the OK button. Phaser® 5500 Laser Printer 2-65