Yamaha RX V659 MCXSP10 Manual - Page 120
Before AUTO SETUP, During AUTO SETUP, Error message, Cause, Remedy
UPC - 027108925295
View all Yamaha RX V659 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
TROUBLESHOOTING ■ AUTO SETUP Before AUTO SETUP Error message Connect MIC! Unplug HP! During AUTO SETUP Cause Optimizer microphone is not connected. Headphones are connected. Remedy Connect the supplied optimizer microphone to the OPTIMIZER MIC jack on the front panel. Unplug the headphones. See page 32 - Error message Cause Remedy E-1:NO FRONT SP E-2:NO SURR.SP E-3:NO PRNS SP E-4:SBR->SBL E-5:NOISY E-6:CHECK SUR. E-7:NO MIC E-8:NO SIGNAL E-9:USER CANCEL E-10:INTERNAL ERROR Front L/R channel signals are not detected. A surround channel signal is not detected. A presence channel signal is not detected. Only right surround back channel signal is detected. Background noise is too loud. Surround back speakers are connected, though surround L/R speakers are not. The optimizer microphone was unplugged during the "AUTO SETUP" procedure. The optimizer microphone does not detect test tones. The "AUTO SETUP" procedure was cancelled due to user activity. An internal error occurred. Select the front speakers with SPEAKERS A or B. Check the front L/R speaker connections. Check the surround speaker connections. Check the presence speaker connections. Connect the surround back speaker to the LEFT SURROUND BACK SPEAKERS terminal if you only have one surround back speaker. Try running "AUTO SETUP" in a quiet environment. Turn off noisy electric equipment like air conditioners or move them away from the optimizer microphone. Connect surround speakers when you use surround back speakers. Connect the supplied optimizer microphone to OPTIMIZER MIC jack on the front panel. Check the microphone setting. Check the speaker connections and placement. Run "AUTO SETUP" again. Run "AUTO SETUP" again. See page 38 13 13 13 13 - - 13 32 32 13 32 32 116