Yamaha RX V659 MCXSP10 Manual - Page 34

CONNECTIONS Setting the speaker impedance CAUTION If you are to use 4 or 6 ohm speakers, set "SP IMP." to "6ΩMIN" as follows BEFORE using this unit. 2,5 (U.S.A. model) ZONE 2 ON/OFF ZONE CONTROL VOLUME MASTER ON OFF MAIN ZONE ON/OFF PHONES OPTIMIZER MIC SPEAKERS A B PRESET/TUNING FM/AM EDIT SEARCH MODE A/B/C/D/E NEXT CATEGORY PROGRAM l PRESET/TUNING/CH h MEMORY TUNING MODE MAN'L/AUTO FM AUTO/MAN'L LEVEL INPUT DISPLAY STRAIGHT TONE CONTROL INPUT MODE MULTI CH INPUT PURE DIRECT SILENT CINEMA EFFECT S VIDEO VIDEO AUX VIDEO L AUDIO R OPTICAL 4 Press STRAIGHT (EFFECT) on the front panel repeatedly to select "6ΩMIN". The following display appears in the front panel display. STRAIGHT EFFECT SP IMP.-6 MIN 2,4 3 1 Make sure this unit is turned off. See page 31 for details about turning on or off this unit. 5 Press MASTER ON/OFF on the front panel to release it outward to the OFF position to save the new setting and turn off this unit. MASTER 2 Press and hold STRAIGHT (EFFECT) on the front panel and then press MASTER ON/OFF inward to the ON position to turn on this unit. This unit turns on, and the advanced setup menu appears in the front panel display. ON OFF Note The setting you made is reflected next time you turn on this unit. STRAIGHT While holding down MASTER EFFECT ON OFF 3 Rotate the PROGRAM selector on the front panel to select "SP IMP.". The following display appears in the front panel display. PROGRAM SP IMP.-8 MIN 30