Yamaha RX V659 MCXSP10 Manual - Page 39

PREPARATION p AUTO SETUP Notes • If "E-10:INTERNAL ERROR" appears during the testing procedure, restart from step 4. • If you selected "RELOAD", "UNDO" or "DEFAULT" in step 4, no test tones are output. • If an error occurs during the "AUTO:CHECK" procedure, the setup procedure is canceled and an error screen appears. For details, see "If an error screen appears" on page 37. • The number on the right of "WARNING" indicates the number of warning messages. For details, see "If a warning screen appears" on page 37. • Depending on the listening environment, "SWFR PHASE:REV" appears during the "AUTO:CHECK" procedure and "SUBWOOFER PHASE" in "SOUND MENU" (see page 88) is automatically set to "REVERSE". 6 Press d to select "RESULT" and then press ENTER to display the setup results in detail. PRESET/CH PRESET/CH A-E/CAT. ENTER A-E/CAT. A-E/CAT. ENTER A-E/CAT. 7 Press j / i repeatedly to toggle between the setup result displays. PRESET/CH A-E/CAT. ENTER A-E/CAT. RESULT:WIRING FRONT L;;;;;;;OK Results of the speaker connection and wiring []:Select [ENTER]:Return RESULT:DISTANCE1 FRONT L;;14.0ft CENTER;;;17.0ft FRONT R;;15.0ft PRNS L;;;17.0ft PRNS R;;;17.0ft []:Select [ENTER]:Return RESULT:SIZE FRONT L;;;;;;LRG Results of the speaker distance from the listening position Results of the frequency response of each speaker p RESULT:EXIT WARNING (3) . RESULT . SP : 5/4/0.1 . DIST: 14.0/ 17.0ft . LVL : -9.0/ +6.5dB >SET CANCEL [ ]/[ ]:Up/Down [ENTER]:Enter []:Select [ENTER]:Return RESULT:EQ CENTER 1:100Hz;;;+2.5dB 2:300Hz;;;-0.5dB 3:1.5kHz;;+0.5dB 4:1.8kHz;;+2.5dB 5:1.8kHz;;-3.5dB 6:2.5kHz;;+2.5dB 7:10kHz;;;+2.5dB []:Select [ENTER]:Return Results of the parametric equalizer of each speaker RESULT:WIRING FRONT L;;;;;;;OK []:Select [ENTER]:Return RESULT:LEVEL1 FRONT L;;;+1.0dB CENTER;;;;-1.5dB FRONT R;;;+6.5dB PRNS L;;;;-9.0dB PRNS R;;;;+1.0dB []:Select [ENTER]:Return Results of the speaker output level 35