Yamaha RX V659 MCXSP10 Manual - Page 94
DEQUALIZER, Center graphic equalizer
UPC - 027108925295
View all Yamaha RX V659 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
p p p p SET MENU Notes • "CENTER", "SUR. L", "SUR. R", "SB L", "SB R", "SWFR", "PRNS L" and "PRNS R" cannot be adjusted if "CENTER SP" (see page 87), "SUR. L/R SP" (see page 87), "SUR. B L/R SP" (see page 87), "LFE/BASS OUT" (see page 88) and "PRESENCE SP" (see page 87) are set to "NONE" respectively. • Instead of "SB L" and "SB R", "SUR. B" is displayed if "SUR. B L/R SP" is set to either "SMLx1" or "LRGx1" (see page 87). ■ Center graphic equalizer D)EQUALIZER Use this feature to select the parametric equalizer or the graphic equalizer. Equalizer select EQ TYPE SELECT Use this feature to select the type of equalizer. Choices: AUTO PEQ, CENTER GEQ, EQ OFF D)EQUALIZER EQ TYPE SELECT . CENTER GEQ / : CT GEQ []:Select • Select "AUTO PEQ" to use the parametric equalizer adjusted in "AUTO SETUP" (see page 32). • Select "CENTER GEQ" to adjust the built-in 5frequency band graphic equalizer for the center speaker so that the tonal quality of the center speaker matches that of the front left and right speakers. • Select "EQ OFF" to deactivate the equalizing feature. Notes • "AUTO PEQ" is automatically selected when you run "AUTO SETUP" (see page 32). • If you press u / d while "CENTER GEQ" is selected, the OSD changes to the following screen. Center graphic equalizer CENTER GEQ When you select "CENTER GEQ" in "EQ TYPE SELECT", use this feature to adjust the built-in 5frequency band (100Hz, 300Hz, 1kHz, 3kHz and 10kHz) graphic equalizer for the center channel so that the tonal quality of the center speaker matches that of the front left and right speakers. You can make adjustments while listening to the currently selected source component or a test tone. Control range: -6.0 to +6.0 dB Control step: 0.5 dB Initial setting: 0.0 dB D)EQUALIZER . TEST >OFF ON -______+ 100Hz ;;;;;; 0dB 300Hz ;;;;;; 0dB 1kHz ;;;;;; 0dB 3kHz ;;;;;; 0dB 10kHz ;;;;;; 0dB [ ]/[ ]:Up/Down []:Adjust y Press u / d to select a frequency band and j / i to adjust the selected frequency band. Test tone TEST Use this feature to make adjustments of "CENTER GEQ" while listening to a test tone. Choices: OFF, ON • Select "OFF" to stop test tones and output the currently selected source component. • Select "ON" to output test tones from the front left and center speakers, and adjust the tonal quality of the center speaker. 90