Yamaha RX V659 MCXSP10 Manual - Page 43

BASIC OPERATION PLAYBACK 5 Rotate VOLUME on the front panel (or press VOLUME +/- on the remote control) to adjust the volume to the desired output level. VOLUME or VOLUME 7 Rotate the PROGRAM selector on the front panel (or press one of the sound field program selector buttons on the remote control repeatedly) to select the desired sound field program. The name of the selected sound field program appears in the front panel display and in the OSD. See page 71 for details about sound field programs. Front panel Remote control PROGRAM 6 Press TONE CONTROL on the front panel repeatedly to select "TREBLE" or "BASS" and then rotate the PROGRAM selector to adjust the corresponding frequency response level. TONE CONTROL PROGRAM Front panel or STEREO 1 MUSIC ENTERTAIN MOVIE 2 3 4 STANDARD SELECT EXTD SUR. PURE DIRECT 5 6 7 8 SPEAKERS 9 ENHANCER 0 NIGHT 10 STRAIGHT ENT. EFFECT Remote control VCR DVR V-AUX DTV/CBL pDVD SP A TREBLE MD/CD-R TUNER CD XM PHONO VOLUME dB 0dB L R • Select "TREBLE" to adjust the high-frequency response. • Select "BASS" to adjust the low-frequency response. Notes • Speaker and headphone adjustments are stored independently. • When "TONE BYPASS" is set to "AUTO" (see page 91), and "BASS" and "TREBLE" are set to 0 dB, audio output automatically bypasses the tone control circuitry of this unit. • If you increase or decrease the high-frequency or lowfrequency sound to an extreme level, the tonal quality of the surround speakers may not match that of the front left and right speakers. • TONE CONTROL is not effective when the Pure Direct mode (see page 45) is selected or when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 44). • To enjoy multi-channel sources in surround, see page 48 for details. VCR DVR V-AUX DTV/CBL pDVD MD/CD-R TUNER CD XM PHONO VOLUME SP A dB TV Sports L R Currently selected surround field program Notes • Choose a sound field program based on your listening preference, not merely on the name of the program. • When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source. • Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 44). • Sampling frequencies higher than 48 kHz (except for DTS 96/24 signals) are sampled down to 48 kHz and then sound field programs are applied. • To display information about the currently selected input source in the OSD, see page 46 for details. 39