Yamaha RX V659 MCXSP10 Manual - Page 92
Lfe/bass Out, Cross Over, Subwoofer Phase, Priority, Bass Out, Normal
UPC - 027108925295
View all Yamaha RX V659 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
SET MENU Bass out LFE/BASS OUT Use this feature to select the speakers that output the LFE (low-frequency effect) and the low-frequency signals. Choices: SWFR, FRNT, BOTH Subwoofer phase SUBWOOFER PHASE Use this feature to switch the phase of your subwoofer if bass sounds are lacking or unclear. Choices: NORMAL, REVERSE LFE/BASS OUT 02ASUBWOOFER PHASE SWFR FRNT>BOTH >NORMAL REVERSE • Select "SWFR" (subwoofer) if you connected a subwoofer. The LFE signals as well as the lowfrequency signals of other speakers set to "SML" (or "SMALL") or to "NONE" are directed to the subwoofer. • Select "FRNT" (front) if you did not connect a subwoofer. The LFE signals, the low-frequency signals of the front left and right channels, and the lowfrequency signals of other speakers set to "SML" (or "SMALL") or to "NONE" are all directed to the front left and right speakers regardless of the "FRONT SP" setting (see page 86). • Select "BOTH" (both) if you connected a subwoofer. The low-frequency signals of any source are output from the subwoofer. The LFE signals as well as the low-frequency signals of other speakers set to "SML" (or "SMALL") or to "NONE" are directed to the subwoofer. The low-frequency signals of the front left and right channels are directed to the front left and right speakers and the subwoofer regardless of the "FRONT SP" setting (see page 86). Crossover CROSS OVER Use this feature to select a crossover frequency of all the speakers set to "SML" (or "SMALL") or to "NONE" in "SPEAKER SET" (see pages 86 and 87). All frequencies below the selected frequency will be sent to the subwoofer or to the speakers set to "LRG" (or "LARGE") in "SPEAKER SET" (see pages 86 and 87). Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz • Select "NORMAL" if you do not want to reverse the phase of your subwoofer. • Select "REVERSE" to reverse the phase of your subwoofer. Presence/Surround back channel priority PRIORITY Use this feature to prioritize either the presence or the surround back speakers when playing sources that contain surround back channel signals using the CINEMA DSP sound field programs. Choices: PRch, SBch PRIORITY PRch >SBch • Select "PRch" to use the presence speakers even when surround back channel signals are input. The signals for the surround back channel will be output from the surround speakers. • Select "SBch" to use the surround back speakers when a surround back channel signals is detected in a CINEMA DSP program. The presence channel signals are output from the front speakers. CROSS OVER FREQ;;;80Hz 88