Yamaha RX V659 MCXSP10 Manual - Page 45

BASIC OPERATION y "NIGHT:CINEMA" and "NIGHT:MUSIC" adjustments are stored independently. Notes • You cannot use the night listening modes in the following cases: - when the Pure Direct mode (see page 45) is selected. - when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 44). - when headphones are connected to the PHONES jack. • The night listening modes may vary in effectiveness depending on the input source and surround sound settings you use. Selecting the input mode This unit comes with a variety of input jacks. Do the following to select the type of input signals you want to use. y • We recommend setting "INPUT MODE" to "AUTO" in most cases. • You can adjust the default input mode of this unit by using the "INPUT MODE" parameter in "INPUT MENU" (see page 93). Notes • To play DTS-encoded CDs when using a digital audio connection, be sure to set "INPUT MODE" to "DTS". • DTS decoding may not be performed correctly depending on the player even if you make a digital connection between this unit and the player. 1 Rotate the INPUT selector on the front panel to select the desired input source. USING AUDIO FEATURES AUTO DTS ANALOG Automatically selects input signals in the following order: (1) Digital signals (2) Analog signals Selects only digital signals encoded in DTS. If no DTS signals are input, no sound is output. Selects only analog signals. If no analog signals are input, no sound is output. Note When "INPUT MODE" is set to "AUTO", this unit automatically switches to the appropriate decoder if a Dolby Digital or DTS signal is detected. Using the sleep timer Use this feature to automatically set this unit to the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off any external components connected to AC OUTLET(S) (see page 29). 1 Press one of the input selector buttons on the remote control to select the desired input source. CD DVD V-AUX MD CD-R CBL DTV DVR SLEEP XM TUNER MULTI CH IN VCR PHONO INPUT 2 Press INPUT MODE on the front panel repeatedly to select the desired input mode. INPUT MODE 2 Start playback on the selected source component or select a broadcast station. Refer to the operating instructions for the source component. See page 52 for details about tuning instructions. Available input sources VCR DVR V-AUX DTV/CBL pDVD MD/CD-R TUNER CD XM PHONO VOLUME SP A dB DVD AUTO L R Currently selected input source Currently selected input mode 41