Yamaha RXV1065 Owner's Manual - Page 25

BASIC OPERATION Playback Basic procedure 1 Turn on external components (TV, DVD player, etc.) connected to this unit. 2 Rotate the RINPUT selector (or press dInput selection key) to select an input source. The name of the selected input source is displayed for a few seconds. Input source name VOL. AV1 y • You can also select an input source from the GUI screen (page 23). • You can change the input source name displayed on the front panel display or GUI screen as necessary (page 60). 3 Play the external component that you have selected as the source input, or select a radio station on the tuner. Refer to the operating instructions of the external component for details on playback. For selecting radio stations or playback of an iPod, Bluetooth component or USB storage device using this unit, see the following. • FM/AM radio tuning (page 29) • iPod playback (page 42) • Bluetooth component playback (page 44) • USB storage device playback (page 45) 4 Turn the JVOLUME control (or press sVOLUME +/-) to adjust the volume. Volume VOL. Volume -18.5dB SW L CR SL SR Note When you play back a DTS-CD, noise may be output in some conditions, which may cause a speaker malfunction. Make sure that the volume is set to low before starting playback. If noise is output, do the following. 1) When only noise is output If a DTS bitstream signal is not properly input to this unit, only noise is output. Connect the playback component to this unit by digital connection and play back the DTS-CD. If the condition is not improved, the problem may results from the playback component. Consult the manufacturer of the playback component. 2) When noise is output during playback or skip operation Before playing back the DTS-CD, display the Option menu after selecting the input source and set "Decoder Mode" to "DTS" (page 48). Using the SCENE function This unit has a SCENE function that allows you to change input sources and sound field programs with one key. Four scenes are available for different usages, such as playing movies or music. The following input sources and sound field programs are provided as the initial factory settings. Keys BD/DVD TV CD RADIO Input source HDMI 1 AV 1 AV 3 TUNER Sound field program Straight Straight Straight 7ch Enhancer y • When this unit is on standby, you can turn on this unit by pressing PSCENE (or hSCENE). • If you connect a Yamaha DVD/CD player that has the capability of the SCENE control signals to the REMOTE OUT jack of this unit, you can start playback on the player by using the SCENE function. Selecting a SCENE Press PSCENE (or hSCENE). y • You can also select a SCENE from the GUI screen (page 23). 22 En