Yamaha RXV1065 Owner's Manual - Page 31
Enjoying unprocessed input sources (Straight decode mode)
UPC - 027108933474
View all Yamaha RXV1065 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Enjoying the sound field programs Enjoying unprocessed input sources (Straight decode mode) In straight decode mode, sounds are reproduced without sound field effect. 2-channel stereo sources are output from only the front left and right speakers. Multi-channel input sources are decoded straight into the appropriate channels and multi-channel sounds are reproduced without a sound field effect. 1 To enable straight decode mode, press OSTRAIGHT (or gSTRAIGHT). "Straight" appears on the front panel display. 2 To cancel straight decode mode, press OSTRAIGHT (or gSTRAIGHT) again. A sound field program name appears on the front panel display, and sound is reproduced with that sound field effect. Enjoying sound field programs without surround speakers (Virtual CINEMA DSP) Virtual CINEMA DSP allows you to enjoy DSP sound field surround effects even without any surround speakers by using virtual surround speakers. You can even enjoy Virtual CINEMA DSP using a minimal two-speaker system that does not include a center speaker. When "Surround Speaker" in the Setup menu is set to "None" (page 56), this unit operates in Virtual CINEMA DSP mode. Note • Virtual CINEMA DSP is not available in the following conditions even if you set "Surround Speaker" to "None" (page 56). - headphone plug is connected to the PHONES jack. - 7ch Stereo of the field sound program is selected. - Pure Direct mode or straight decode mode is used. Enjoy sound field programs with headphones (SILENT CINEMA™) SILENT CINEMA allows you to enjoy multi-channel sources with your headphones. SILENT CINEMA mode is automatically selected when you connect the headphone plug to the PHONES jack. Note • SILENT CINEMA mode is not available in the following conditions. - 2ch Stereo of the sound field program is selected. - Pure Direct mode or straight decode mode is selected. Using CINEMA DSP 3D mode CINEMA DSP 3D mode creates the intensive and accurate stereoscopic sound field in the listening room. To use this unit in CINEMA DSP 3D mode, presence speakers are required. Connect the presence speakers to the EXTRA SP terminals, perform the following settings and then select a CINEMA DSP related sound field program. • Disconnect the headphones from the PHONES jack. • Set "Extra Speaker Assignment" to "Presence" (page 56). • Set "3D DSP" to "On" (page 50). When the sound field program runs in CINEMA DSP 3D mode, the 3D indicator on the front panel display lights up. 28 En