Yamaha RXV1065 Owner's Manual - Page 53

Editing surround decoders/sound field programs Setting sound field parameters Although the field sound programs would satisfy you as they are with the default parameters, you can arrange sound effect or decoders suitable for acoustical conditions of sources or rooms by setting the parameters. y • You cannot configure the parameters when "Memory Guard" is set to "On" (page 60). 1 Turn on the video monitor connected to this unit. 2 Press iON SCREEN on the remote control. The GUI screen appears on the video monitor. 3 Press jCursor n to select "Setup" and then press jENTER. 4 Press jCursor k / n to select "DSP Parameter" and then press jENTER. Sound field program DSP Parameter Program Name Decode Type DSP Level P. Initial Delay P. Room Size Sur. Initial Delay Sur. Room Size Sci-Fi PLIIx Movie 0dB 16ms 1.0 2ms 1.0 Sound field parameters y • The default settings are marked with "*". CINEMA DSP basic parameters DSP Level Adjustable range: -6dB to 0dB* to +3dB Fine adjusts an effect level (level of the sound field effect to be added). You can adjust the level of the sound field effect while checking sound levels. Adjust "DSP Level" as follows. • The effect sound is too soft. • There are no differences between effects of the sound field programs. →Increase the effect level. • The sound is dull. • The sound field effect is added too much. →Reduce the effect level. Dialogue Lift Choices: 0* to 5 Use this feature to adjust the vertical position of the dialogues in movies. The ideal position of the dialogues is at the center of the video monitor screen. Sound field parameters Set values 5 Press jCursor k / n to select "Program Name" and then press jCursor l / h to select a sound field program to edit. 6 Press jCursor k / n to select a parameter to edit and then press jCursor l / h to change the setting. For details on functions and adjustable ranges of the sound field parameters, see "Sound field parameters" on this page. y • Repeat steps 5 and 6 to change other sound field program parameters. 7 To turn off the GUI screen, press iON SCREEN. To initialize the parameters of the selected sound field program, press jCursor n repeatedly to select "Initialize" and then press jCursor h. Then, press jCursor h again to execute the initialization or jCursor l to cancel it. The ideal dialogue position If the dialogues are heard at the lower position of the video monitor screen, increase the value of "Dialogue Lift". Move up to the ideal dialogue position When the value is set to zero, the position is at the lowest. The position gets higher as you increase the value. Notes • This setting is available only when "Extra Speaker Assignment" is set to "Presence" (page 56). • You cannot move the dialogue position down from the initial dialogue position. 3D DSP Choices: On*, Off When CINEMA DSP 3D is enabled, sets whether to use sound field programs in 3D mode. 50 En