Yamaha RXV1065 Owner's Manual - Page 62

INTRODUCTION PREPARATION BASIC OPERATION ■ Aspect Choices: Through*, 16:9, Smart Zoom Sets a horizontal to vertical ratio (aspect ratio) of images reproduced by HDMI signals output from the HDMI OUT jack when the HDMI signals are converted from analog video input signals by a video conversion function. Through Outputs the video signals without changing the aspect ratio. 16:9 Outputs the video signals that displays 4:3 images on a 16:9 TV with black bands on the right and left sides of the TV screen. Smart Zoom Outputs the video signals that displays 4:3 images on a 16:9 TV by stretching right and left of images to fit on the TV screen. Notes • You cannot change the aspect ratio of the screen when "Resolution" is set to "Through". • This setting is not effective for inputs with the aspect ratio other than 4:3. • You cannot obtain an effect of the aspect ratio when visual signals are input from the HDMI 1-4 jacks or when 720p, 1080i or 1080p signals are input. Display You can set items for a video monitor and the front panel display. Dimmer Adjustable range: -4 to 0* Sets brightness of the front panel display. As the value is lowered, the brightness of the front panel display is darkened. Note • The brightness of display does not become bright in Pure Direct mode even if the value is increased. Front Panel Display Scroll Choices: Continuous*, Once Selects the way to scroll the screen when a total number of characters exceed a display area of the front panel display. Continuous Once Repeatedly displays all characters by scrolling. Displays all characters by scrolling once, halts scrolling and then displays first 14 characters. GUI Position Adjustable range: -5 to 0* to +5 Adjusts the position of the GUI screen displayed on the video monitor. To move the screen up (or to the right), set this value larger. To move the screen down (or to the left), set this value smaller. Operating various settings for this unit (Setup menu) Volume You can set items for volumes. ■ Adaptive DRC Choices: Auto, Off* Adjust the dynamic range in conjunction with the volume level. This feature is useful when you are listening at lower volumes or at night. When this function is enabled, the dynamic range is adjusted as follows. When the volume level is low: narrow the dynamic range When the volume level is high: widen the dynamic range Output level Output level Auto Off Input level Volume : low Auto Off Input level Volume : high Auto Adjusts the dynamic range automatically. Off Not adjust the dynamic range automatically. y • This setting is also effective for headphones. ■ Max Volume Adjustable range: -30.0dB to +15.0dB, +16.5dB* (5.0 dB step) Sets the maximum volume level so that the volume will not be accidentally increased. For example, you can adjust the volume between -80.0 dB and -5.0 dB (or Mute) when you set this parameter to "-5.0dB". The volume increases to the maximum level when this parameter is set to +16.5 dB (default). ■ Initial Volume Adjustable range: Off*, Mute, -80.0dB to +16.5dB (0.5 dB step) Sets the volume at the time this unit is turned on. When this parameter is set to "Off", the volume level used when this unit was set to standby is applied. Note • When you set "Max Volume" and "Initial Volume" the setting of "Max Volume" becomes effective. For example, when you set "Max Volume" to "-30.0dB" and "Init. Volume" to "0.0dB", the volume is automatically set to "-30.0dB" at the next time this unit is turned on. ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX English 59 En