Yamaha RXV1065 Owner's Manual - Page 51

Setting the option menu for each input source (Option menu) Decoder Mode Input source: HDMI1-4, AV1-4 Choices: Auto*, DTS Selects DTS digital audio signals for reproduction. Auto DTS Automatically selects audio input signals. Selects DTS signals only. Other input signals are not reproduced. Extended Surround Input source: HDMI1-4, AV1-4 Choices: Auto*, PLIIxMovie, PLIIxMusic, EX/ES, Off Selects whether to reproduce multi-channel input signals in 6.1- or 7.1-channel when surround back speakers are used. Auto PLIIx Movie PLIIx Music EX/ES Off Automatically selects the most suitable decoder according to whether a flag for reproducing surround back channel is present, and reproduces the signals in 6.1- or 7.1channel. Always reproduces signals in 6.1- or 7.1channel using the PLIIxMovie decoder whether or not surround back channel signals are contained. You can select this parameter when two surround back speakers are connected. Always reproduces signals in 6.1- or 7.1channel using the PLIIxMusic decoder whether or not surround back channel signals are contained. You can select this parameter when one or two surround back speakers are connected. Automatically selects the most suitable decoder for input signals whether or not the flag for reproducing surround back channel is present, and always reproduces signals in 6.1channel. Always reproduces original signals whether or not the flag for reproducing surround back channel is present. Signal Info Input source: HDMI1-4, AV1-4, USB Displays information on audio and video signals on the GUI screen and front panel display. You can change items to be displayed using jCursor k / n. • Audio information • Format Format of digital audio signals. Channel The number of input signal channels (front/surround/LFE). For example, if input signal channels are 3 front channels, 2 surrounds and LFE, "3/2/0.1" is displayed. If a channel that cannot be expressed as the above, a total number of channels such as "5.1ch" may be displayed. Sampling Frequency Bitrate The sampling frequency per second in analog-to-digital conversion. The bit rate of input signal per second. Notes • "No Signal" is displayed when no signals are input and "---" is displayed when signals that this unit cannot recognize are input. • The bit rate may vary during playback. • Video information • Video In Format and resolution of video input signal. Video Out Format and resolution of video output signal. Message Error messages about HDMI signals and HDMI components. See the following for details of the error messages. • HDMI error message (appears only when an error has occurred) • HDCP Error HDCP authentication failed. Device Over The number of HDMI components connected is over the limit. Out of Res. The connected monitor is not compatible with the video input signal. Audio Mode Input source: TUNER Choices: Auto*, Mono Sets FM (or HD Radio) broadcasting receiving mode. Auto Mono Receives in stereo mode by priority. Receives in monaural mode. You can get a better reception in monaural mode. Note • (U.S.A. model only) Select "Auto" to tune into HD Radio stations. When "Mono" is selected, you can tune into analog stations only. Auto Preset Input source: TUNER Automatically detects FM radio stations and registers them as preset stations (page 29). y • (U.S.A. model only) Automatically detects FM and AM HD Radio stations and analog FM radio stations and registers them as preset stations. Clear Preset Input source: TUNER, XM, SIRIUS Clears preset station (TUNER: page 30, XM: page 35, SIRIUS: page 39). Parental Lock Input source: SIRIUS Set the Parental Lock (page 40). 48 En