Yamaha RXV1065 Owner's Manual - Page 61

Operating various settings for this unit (Setup menu) Max Outputs sound without adjusting the dynamic range of the input signals. ■ Lipsync Adjusts delay between video output and audio output. HDMI Auto Lipsync Choices: Off*, On Automatically adjusts output timing of audio and video signals when a TV that supports an automatic lip-sync function is connected to this unit. Off Select this when the connected TV does not support the automatic lip-sync function or you do not use the automatic lip-sync function. Set the correction time in "Manual Delay". On Select this when the connected TV supports the automatic lip-sync function. Fine adjust the correction time in "Auto Delay". Auto Delay Adjustable range: 0* to 240ms (1 ms step) Fine adjust the correction time when "HDMI Auto Lipsync" is set to "On". The actual correction time is displayed under in "Auto Delay" field and an offset time set by the user in "Offset" field. Manual Delay Adjustable range: 0* to 240ms (1 ms step) Manually fine adjusts the correction time. Select this when the connected TV does not support the automatic lipsync function or you set "HDMI Auto Lipsync" to "Off". Function Setup You can set various items for HDMI and display. HDMI You can set items for HDMI. ■ HDMI Control Choices: On, Off* Selects on or off of the HDMI control function when a component that supports the HDMI control function is connected with this unit. When this parameter is set to "On", this unit output signals input from the HDMI 1-4 jacks to the video monitor even when this unit is on standby. On Enables the HDMI control function. Off Disables the HDMI control function. y • The BHDMI THROUGH indicator lights up in the following cases while this unit is on standby. - when the HDMI control function is on - when the HDMI signal standby-through function is currently working • When "HDMI Control" is set to "On", this unit consumes 1 to 3 watts of power depending on a condition of an HDMI signal passing through this unit. ■ Standby Through Choices: On, Off* Selects on or off of output of HDMI signals input from the HDMI 1-4 jacks to the HDMI OUT jack when this unit is on standby. When this parameter is set to "On", this unit output signals input from the HDMI 1-4 jacks to the video monitor even when this unit is on standby. On Outputs the HDMI signals to the HDMI OUT jack. Off Not output the HDMI signals to the HDMI OUT jack. y • This parameter is not available when "HDMI Control" is set to "On". • To enables HDMI signal standby-through output, any one of the input sources connected to the HDMI 1-4 jacks must be selected before switching to standby. • When "Standby Through" is set to "On", the BHDMI THROUGH indicator lights up. In this state, this unit consumes up to 3 watts of power even on standby. ■ Audio Output Choices: Amplifier*, TV, Amplifier + TV Selects this unit or a component connected to the HDMI OUT jack of this unit for reproducing sound signals input from the HDMI 1-4 jacks. Amplifier Outputs HDMI sound signals form the speakers connected to this unit. TV Outputs HDMI sound signals from the speakers of a TV connected to this unit. Sound output from the speakers connected to this unit is muted. Amplifier + Outputs HDMI sound signals from the TV speakers connected to this unit and the speakers of a TV connected to this unit. Note • Signal formats of audio and visual signals output from this unit to the TV vary depending on specifications of the monitor. y • This parameter is not available when "HDMI Control" is set to "On". ■ Resolution Choices: Through*, 480p, 720p, 1080i, 1080p Upscales the resolution of HDMI output that is converted from analog video input signals and output from the HDMI OUT jack. Notes • Resolution of the HDMI output converted from 720p or 1080i analog video signals cannot be upscaled. • When a video monitor is connected to the HDMI OUT jack of this unit, this unit automatically detects a resolution that the monitor supports. An asterisk (*) appears on the left of the detected resolution. • If this unit cannot detect the resolution that the monitor supports, set "MON.CHK" in the advanced setup menu to "SKIP" (page 64) and try again. 58 En