2013 Chrysler 200 Owner Manual Convertible - Page 224

222 UNDERSTANDING YOUR INSTRUMENT PANEL If the light comes on and remains on while driving, stop the vehicle and shut off the engine. DO NOT OPERATE When the ignition switch is first turned to ON/ THE VEHICLE UNTIL THE CAUSE IS CORRECTED. RUN, this light will turn on for four to eight seconds as a bulb check. During the bulb check, if The light does not show the quantity of oil in the engine. the driver's seat belt is unbuckled, a chime will sound. This can be determined using the procedure shown in After the bulb check or when driving, if the driver seat "Maintaining Your Vehicle". belt remains unbuckled, the Seat Belt Warning Light will 10. Engine Temperature Warning Light flash or remain on continuously. Refer to "Occupant This light warns of an overheated engine condiRestraints" in "Things To Know Before Starting Your tion. As engine coolant temperatures rise and the Vehicle" for further information. gauge approaches H, this indicator will illuminate and a 9. Oil Pressure Warning Light single chime will sound after reaching a set threshold. This light indicates low engine oil pressure. The Further overheating will cause the temperature gauge to light will come on and remain on when the ignition pass H, and a continuous chime will occur until the switch is turned from the OFF to the ON/RUN position, engine is allowed to cool or the 4 minutes duration is and the light will turn off after the engine is started. If the expired, whichever come first. bulb does not come on during starting, have the system If the light turns on while driving, safely pull over and checked by an authorized dealer. stop the vehicle. If the A/C system is on, turn it off. Also, 8. Seat Belt Reminder Light