2013 Chrysler 200 Owner Manual Convertible - Page 395

STARTING AND OPERATING 393 Automatic Transmission The DRIVE range can be selected when towing. However, if frequent shifting occurs while in this range, select the Љ3Љ range (with four-speed transmission), or select a lower gear using the AutoStick௡ shift control (with six-speed transmission). NOTE: Check the transmission fluid level (four-speed transmission only) before towing. The six-speed transmission does not require a fluid level check before towing. If, however, you notice fluid leakage or transmission malfunction, see your authorized dealer immediately for assistance. AutoStick௡ - If Equipped NOTE: Using a lower gear while operating the vehicle under heavy loading conditions, will improve perfor- - When using the AutoStick௡ shift control, select the highest gear that allows for adequate performance and mance and extend transmission life by reducing excesavoids frequent downshifts. For example, choose "4" if sive shifting and heat build-up. This action will also the desired speed can be maintained. Choose "3" or provide better engine braking. "2" if needed to maintain the desired speed. If you REGULARLY TOW a trailer for more than 45 minutes of continuous operation, then change the auto- - Extended driving at high RPM should be avoided to prevent excess heat generation. A reduction in vehicle matic transmission fluid and filter as specified for "pospeed may be required to avoid extended driving at lice, taxi, fleet, or frequent trailer towing." Refer to the high RPM. Return to a higher gear or vehicle speed "Maintenance Schedule" for the proper maintenance when grade and road conditions allow. intervals. 5