2013 Chrysler 200 Owner Manual Convertible - Page 38

36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE to its full up position after closing the door. This action will remain active for 45 seconds after the ignition switch allows the door to open without resistance and prevents is turned to the LOCK position. Opening either door will cancel this feature. window and top seal damage. Auto Window Down - If Equipped The front window controls on the driver and passenger door trim panels have an Auto-Down feature. These switches are labeled AUTO to indicate this capability. Push the window switch past the first detent, release, and the window will go down automatically. For vehicles equipped with EVIC, the power window switches will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position. Opening either door will cancel this feature. The time for this feature is programmable. Refer to "Electronic Vehicle Information Center (EVIC)/Personal Settings (CustomerProgrammable Features)" in "Understanding Your Instrument Panel" for further information. To open the window part way, push the window switch to the first detent and release it when you want the Reset Window Smart Glass Feature for window to stop. Opening/Closing the Door To cancel the Auto-Down movement, operate the switch If the vehicle battery goes dead, the window Smart Glass either in the up or down direction and release the switch. Feature for opening and closing the door will be disabled. For vehicles not equipped with the Electronic Vehicle To reactivate the window Smart Glass Feature, perform Information Center (EVIC), the power window switches the following steps after vehicle power is restored.