2013 Chrysler 200 Owner Manual Convertible - Page 26

24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the NOTE: If there is no key in the ignition switch, pressing following procedure: the LOCK button on the RKE transmitter while you are in the vehicle will activate the Vehicle Security Alarm. 1. Press and hold the UNLOCK button on a programmed Opening a door with the Vehicle Security Alarm actiRKE transmitter for at least four seconds, but not vated will cause the alarm to sound. Press the UNLOCK longer than 10 seconds. Then, press and hold the button to deactivate the Vehicle Security Alarm System. LOCK button while still holding the UNLOCK button. Illuminated Approach - If Equipped 2. Release both buttons at the same time. This feature activates the headlights for up to 90 seconds 3. Test the feature while outside of the vehicle by press- when the doors are unlocked with the RKE transmitter. ing the LOCK/UNLOCK buttons on the RKE trans- The time for this feature is programmable on vehicles mitter with the ignition in the LOCK position and the equipped with the Electronic Vehicle Information Center key removed. (EVIC). Refer to "Electronic Vehicle Information Center 4. Repeat these steps if you want to return this feature to (EVIC)/Personal Settings (Customer-Programmable Features)" in "Understanding Your Instrument Panel" for its previous setting. further information.