2013 Chrysler 200 Owner Manual Convertible - Page 25

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 • For vehicles not equipped with the EVIC, perform the NOTE: If there is no key in the ignition switch, pressing following procedure: the LOCK button on the RKE transmitter while you are inside the vehicle will activate the Vehicle Security Alarm 1. Press and hold the LOCK button on a programmed System. Opening a door with the Vehicle Security Alarm RKE transmitter for at least four seconds, but not activated will cause the alarm to sound. Press the UNlonger than 10 seconds. Then, press and hold the LOCK button to deactivate the Vehicle Security Alarm UNLOCK button while still holding the LOCK button. System. 2. Release both buttons at the same time. Flash Lights With Lock 3. Test the feature while outside of the vehicle by press- The feature will cause the turn signal lights to flash when ing the LOCK/UNLOCK buttons on the RKE trans- the doors are locked or unlocked with the RKE transmitmitter with the ignition in the LOCK position and the ter. This feature can be turned on or turned off. To change key removed. the current setting, proceed as follows: 4. Repeat these steps if you want to return this feature to • For vehicles equipped with the Electronic Vehicle its previous setting. Information Center (EVIC), refer to "Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)" in "Understanding Your Instrument Panel" for further information. 2