2013 Chrysler 200 Owner Manual Convertible - Page 232

230 UNDERSTANDING YOUR INSTRUMENT PANEL 23. Anti-Lock Brake (ABS) Light - If Equipped This light monitors the ABS. This light will come on when the ignition key is turned to the 24. Electronic Stability Control (ESC) Activation/ ON/RUN position and may stay on for ap- Malfunction Indicator Light - If Equipped proximately three seconds. The "ESC Activation/Malfunction Indicator If the ABS light remains on or comes on during driving, Light" in the instrument cluster will come on it indicates that the Anti-Lock portion of the brake system when the ignition switch is turned to the is not functioning and that service is required, however, ON/RUN position. It should go out with the the conventional brake system will continue to operate engine running. If the "ESC Activation/Malfunction Innormally provided that the BRAKE warning light is not dicator Light" comes on continuously with the engine on. running, a malfunction has been detected in the ESC If the ABS light is on, the brake system should be serviced system. If this light remains on after several ignition as soon as possible to restore the benefit of Anti-Lock cycles, and the vehicle has been driven several miles (kilometers) at speeds greater than 30 mph (48 km/h), see Brakes. your authorized dealer as soon as possible to have the The ABS warning light should be checked frequently to problem diagnosed and corrected. assure that it is operating properly. Turn the ignition key to the on position, but do not start the vehicle. The light should come on. If the light does not come on, have the system inspected by an authorized dealer.