2013 Chrysler 200 Owner Manual Convertible - Page 299

UNDERSTANDING YOUR INSTRUMENT PANEL 297 adequate system lubrication to minimize the possibility FLOOR, MIX, or DEFROST mode. The air is directed at of compressor damage when the system is started again. the area of the windows through which you view the outside mirrors. Window Fogging Interior fogging on the windshield can be quickly re- Outside Air Intake moved by turning the mode selector to Defrost. The Mix mode can be used to maintain a clear windshield and provide sufficient heating. If side window fogging becomes a problem, increase blower speed. Vehicle windows tend to fog on the inside in mild but rainy or humid weather. Make sure the air intake, located directly in front of the windshield, is free of obstructions such as leaves. Leaves collected in the air intake may reduce airflow, and if they enter the plenum, they could plug the water drains. In winter months, make sure the air intake is clear of ice, slush, and snow. 4 NOTE: Recirculate without A/C should not be used for A/C Air Filter - If Equipped long periods as fogging may occur. The A/C Filter prevents most dust and pollen from entering the cabin. The filter acts on air coming from outside the Side Window Demisters vehicle and recirculated air within the passenger compartA side window demister outlet is located at each end of ment. Refer to "Maintenance Procedures" in "Maintaining the instrument panel. These non-adjustable outlets direct Your Vehicle" for A/C Air Filter service information or see air toward the side windows when the system is in the your authorized dealer for service. Refer to "Maintenance Schedules" for filter service intervals.