2013 Chrysler 200 Owner Manual Convertible - Page 32

30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Enter Remote Start Mode Press and release the REMOTE START button on the RKE transmitter twice within five seconds. The vehicle doors will lock, the parking lights will flash and the horn will chirp twice (if programmed). Then, the engine will start and the vehicle will remain in the Remote Start mode for a 15-minute cycle. NOTE: • If an engine fault is present the vehicle will start and then shut down 10 seconds later. Remote start will also cancel if any of the following occur: • The engine stalls or RPM exceeds 2500 • Any engine warning lamps come on • Low Fuel Light turns on • The hood is opened • The hazard switch is pressed • For security, power window operation is disabled • The transmission is moved out of PARK when the vehicle is in the Remote Start mode. • The brake pedal is pressed • The engine can be started two consecutive times (two To Exit Remote Start Mode Without Driving The 15 minute cycles) with the RKE transmitter. However, Vehicle the ignition switch must be cycled to the ON/RUN position before you can repeat the start sequence for a Press and release the REMOTE START button one time or allow the engine to run for the entire 15 minute cycle. third cycle.