2013 Chrysler 200 Owner Manual Convertible - Page 27

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 1. Press the LOCK button on a programmed RKE transmitter for at least four seconds, but not longer than 10 Press and release the LOCK button on the RKE transmitseconds. Then, press the PANIC button while still ter to lock both doors. The turn signal lights will flash holding the LOCK button. and the horn will chirp once to acknowledge the lock signal. 2. Release both buttons at the same time. To Lock The Doors Sound Horn With Lock 3. Test the feature while outside of the vehicle by pressing the LOCK button on the RKE transmitter with the This feature will cause the horn to chirp when the doors ignition in the LOCK position and the key removed. are locked with the RKE transmitter. This feature can be turned on or off. To change the current setting, proceed as 4. Repeat these steps if you want to return this feature to follows: its previous setting. • For vehicles equipped with the Electronic Vehicle Information Center (EVIC), refer to "Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)" in "Understanding Your Instrument Panel" for further information. NOTE: If there is no key in the ignition switch, pressing the LOCK button on the RKE transmitter while you are in the vehicle will activate the Vehicle Security Alarm. Opening a door with the Vehicle Security Alarm activated will cause the alarm to sound. Press the UNLOCK • For vehicles not equipped with the EVIC, perform the button to deactivate the Vehicle Security Alarm System. following steps: 2