2013 Chrysler 200 Owner Manual Convertible - Page 247

UNDERSTANDING YOUR INSTRUMENT PANEL 245 When the DTE value is less than 30 miles (48 km) • If the Tire Pressure System requires service, ЉCheck TPM SystemЉ is displayed. Tire PSI is an information estimated driving distance, the DTE display will change only function and cannot be reset. to a text display of ЉLOW FUEL". This display will continue until the vehicle runs out of fuel. Adding a Elapsed Time significant amount of fuel to the vehicle will turn off the Shows the total elapsed time of travel since the last reset. LOW FUEL text and a new DTE value will display. Elapsed time will increment when the ignition switch is Tire PSI in the RUN or START position. Press and release the MENU button until ЉTire PSIЉ is Elapsed time is displayed as follows: displayed. hours:minutes:seconds Tire pressure information is displayed as follows: Elapsed time can be reset by pressing and holding the • If tire pressure is OK for all tires, TIRE and a vehicle SELECT button (as prompted in the EVIC display). Upon graphic are displayed with tire pressure values in each reset all digits will change to zeros and time will start corner or the graphic. incrementing again if the ignition switch is in RUN or • If one or more tires have low pressure, LOW TIRE and START. a vehicle graphic are displayed with tire pressure values in each corner of the graphic. Tire pressure values that are too low will be flashing. 4