2003 Ducati Superbike 999S Owners Manual - Page 106

E Setting special function (vehicle model and units of measurement) The engine control unit transmits the correct vehicle model and unit measurement information automatically for the instrument panel to display. To force a change of these parameters, turn the key from OFF to ON while holding down both buttons (1) and (2). Press the button (1) to scroll through available configurations. To store your selection, hold down the button (2) for 5 seconds, until the display will read OFF. Set the key to OFF. Note The dotted boxes in the figure are the display areas for vehicle version (normal, R or S). Lap time recording (fig. 10 and 11) This function lets you record lap time and displays top speed and engine rpm during that lap. Select the LAP mode in the display (4)(see page 14). Press the engine start button (5) while riding to start the on-board chronometer. Pressing the button (5) again will stop the chronometer. Note In the LAP mode, the engine may not be started using the starter button (5). fig. 9 16