2003 Ducati Superbike 999S Owners Manual - Page 156

Note Main wiring harness cable does not need to be disconnected to replace the headlamp bulbs. Note Be careful to hold the new bulb at the base only. Never touch the transparent body with your fingers or it will blacken resulting in reduced bulb brilliancy. 5 5 5 5 fig. 66 E Refitting After changing the burnt-out bulb, connect the instrument panel connector to the main wiring harness, locate the instrument panel to the rubber grommets and refit panel. Refit the bottom cover and the headlamp fairing and secure them using the retaining screws. Make sure the turn indicator wires are correctly routed in the grooves inside headlamp supports. Changing the parking light bulb Remove headlight fairing (see page 54), detach instrument panel connector (2, fig. 65) from wiring and put your hand into the headlamp support to grasp the parking light bulb (1). Extract the bulb holder from its seat and change the bulb. Then reconnect intrument panel wiring and properly position it on its buffers. 4 1 fig. 67 66