2003 Ducati Superbike 999S Owners Manual - Page 133

DIRECTIONS FOR USE For all mechanical moving parts of the motorcycle to adapt to one another and above all not to adversely affect the life of basic engine parts, it is advisable to avoid harsh accelerations and not to run the engine at high rpm for too long, especially uphill. Furthermore, the drive chain should be inspected frequently. Lubricate it as required. From 1000 to 2500 km At this point, you can squeeze some more power out of your engine, being careful, however, to never exceed: 7000 rpm. Important During the whole running-in period, the maintenance and service rules recommended in the warranty card should be observed carefully. Failure to comply with these rules will release Ducati Motor Holding S.p.A. from any liability whatsoever for any engine damage or shorter engine life. Running-in recommendations Max. rotation speed (fig. 40) Rotation speed for running-in period and during standard use (rpm): 1) up to 1000 km; 2) from 1000 to 2500 km; 3) after 2500 km. Up to 1000 km During the first 1000 km, keep an eye on the revolution meter. The indicator must not exceed: 5500-6000 rpm. During the first hours of riding, it is advisable to run the engine at varying load and rpm, though still within recommended limit. To this end, roads with plenty of bends and even slightly hilly areas are ideal for a most efficient running-in of engine, brakes and suspensions. For the first 100 km, use the brakes gently. Do not brake violently or keep brake applied for too long. This will enable a correct break-in of friction material on brake pads against brake discs. E 43