3Com 3CRWER300-73-US User Guide - Page 100
Gateway, Apply, Network Address: 10.1.4.0
UPC - 662705532622
View all 3Com 3CRWER300-73-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
98 CHAPTER 5: CONFIGURING THE ROUTER ■ Gateway - the Router used to route data to the network specified by the network address. ■ Interface - select the interface. Note that you should only confiqure either the Gateway information or select the Interface. After you have finished making changes to the table, click Apply. Here is an example of setting up a static route. ■ IP address of your PC: 10.1.4.52 ■ Subnet mask: 255.255.252.0 ■ Default Gateway: 10.1.4.254 ■ Network Address: 10.1.4.0 Figure 79 Add Static Route Example Screen
98
C
HAPTER
5: C
ONFIGURING
THE
R
OUTER
■
Gateway
— the Router used to route data to the network specified by
the network address.
■
Interface — select the interface.
Note that you should only confiqure either the Gateway information or
select the Interface. After you have finished making changes to the table,
click
Apply
.
Here is an example of setting up a static route.
■
IP address of your PC: 10.1.4.52
■
Subnet mask: 255.255.252.0
■
Default Gateway: 10.1.4.254
■
Network Address: 10.1.4.0
Figure 79
Add Static Route Example Screen