3Com 3CRWER300-73-US User Guide - Page 41
PPPoE Mode, Username, Password, Retype Password, Service Name, Auto Reconnect After Timeout
UPC - 662705532622
View all 3Com 3CRWER300-73-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Accessing the Setup Wizard 39 PPPoE Mode PPPoE is often used for DSL connection. To set up the Router for use with a PPPoE (PPP over Ethernet) connection, use the following procedure: Figure 25 PPPoE Screen 1 Enter your user name in the Username field. 2 Enter your password in the Password field. 3 Re-type your password in the Retype Password field. 4 The Service Name field is optional, enter this information if your ISP requires it. 5 Enter the MTU information, the default is 1492. Do not change the MTU value unless specifically instructed by your ISP. 6 Enter the maximum Idle Timeout for the Internet connection. After this time has been exceeded the connection will be terminated. Check the Auto Reconnect After Timeout box to automatically re-establish the connection as soon as you attempt to access the Internet again. 7 Check all of your settings, and then click Next. The LAN Settings screen will then be displayed (refer to Figure 28).