3Com 3CRWER300-73-US User Guide - Page 43

The Layer Two Tunneling Protocol L2TP provides a standard method for, L2TP mode

Get 3Com 3CRWER300-73-US - Wireless 11n Cable/DSL Firewall Router PDF manuals and user guides
UPC - 662705532622
View all 3Com 3CRWER300-73-US manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Accessing the Setup Wizard 41 L2TP mode The Layer Two Tunneling Protocol (L2TP) provides a standard method for transporting the link layer of the Point-to-Point Protocol (PPP) between a dial-up server and a Network Access Server, using a network connection in lieu of a physical point-to-point connection. This mode is most often used in Israel. To set up the Router for use with a L2TP (Layer 2 Tunneling Protocol) connection, use the following procedure: Figure 27 L2TP Screen 1 Enter the L2TP Server information. 2 Enter the User ID and Password required by your ISP. 3 Retype the password. 4 Enter the maximum Idle Timeout for the Internet connection. After this time has been exceeded the connection will be terminated. 5 Check the Get IP By DHCP box to receive IP address from your ISP's DHCP function. If this box is not checked, enter the IP address, Subnet mask, and Default Gateway information on the corresponding fields. 6 Check all of your settings, and then click Next. The LAN Settings screen will then be displayed (refer to Figure 28).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
Accessing the Setup Wizard
41
L2TP mode
The Layer Two Tunneling Protocol (L2TP) provides a standard method for
transporting the link layer of the Point-to-Point Protocol (PPP) between a
dial-up server and a Network Access Server, using a network connection
in lieu of a physical point-to-point connection. This mode is most often
used in Israel. To set up the Router for use with a L2TP (Layer 2 Tunneling
Protocol) connection, use the following procedure:
Figure 27
L2TP Screen
1
Enter the
L2TP Server
information.
2
Enter the User ID and Password required by your ISP.
3
Retype the password.
4
Enter the maximum
Idle Timeout
for the Internet connection. After this
time has been exceeded the connection will be terminated.
5
Check the
Get IP By DHCP
box to receive IP address from your ISP’s DHCP
function. If this box is not checked, enter the IP address, Subnet mask,
and Default Gateway information on the corresponding fields.
6
Check all of your settings, and then click
Next
.
The LAN Settings screen will then be displayed (refer to
Figure 28
).