3Com 3CRWER300-73-US User Guide - Page 80
Internet sharing protocol, L2TP Server, Get IP By DHCP, Apply, Select L2TP from
UPC - 662705532622
View all 3Com 3CRWER300-73-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
78 CHAPTER 5: CONFIGURING THE ROUTER L2TP If your ISP uses L2TP as the Internet connection protocol, setup the details on this screen. This options is mostly used in Israel. Figure 60 L2TP Connection Screen 1 Select L2TP from the Internet sharing protocol drop-down menu. 2 Enter the L2TP Server information. 3 Enter the User ID and Password required by your ISP. 4 Retype the password. 5 Enter the maximum Idle Timeout for the Internet connection. After this time has been exceeded the connection will be terminated. 6 Check the Get IP By DHCP box to receive IP address from your ISP's DHCP function. If this box is not checked, enter the IP address, Subnet mask, and Default Gateway information. 7 Click Apply.
78
C
HAPTER
5: C
ONFIGURING
THE
R
OUTER
L2TP
If your ISP uses L2TP as the Internet connection protocol, setup the details
on this screen. This options is mostly used in Israel.
Figure 60
L2TP Connection Screen
1
Select L2TP from the
Internet sharing protocol
drop-down menu.
2
Enter the
L2TP Server
information.
3
Enter the User ID and Password required by your ISP.
4
Retype the password.
5
Enter the maximum Idle Timeout for the Internet connection. After this
time has been exceeded the connection will be terminated.
6
Check the
Get IP By DHCP
box to receive IP address from your ISP’s DHCP
function. If this box is not checked, enter the IP address, Subnet mask,
and Default Gateway information.
7
Click
Apply
.