3Com 3CRWER300-73-US User Guide - Page 116
Set the PPTP Type Setting to, IP. Check the Auto - vpn pptp
UPC - 662705532622
View all 3Com 3CRWER300-73-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
114 CHAPTER 5: CONFIGURING THE ROUTER Figure 95 Add new PPTP VPN Tunnel Screen 1 Set the Tunnel Type to PPTP. 2 Enter a descriptive name for the tunnel in the Tunnel Name field. 3 Enter the User name and Password. 4 Enter the Idle Timeout value. 5 Set the PPTP Type Setting to PPTP Server, or PPTP Client. ■ if you set the type as PPTP Client, then set the Local Type Setting to Network or Host, then enter the Remote Server IP. Check the Auto reconnect box, if you want to auto-reconnect after disconnection. ■ if the PPTP Type Setting is set to PPTP Server, go to step 6. 6 Check the box to enable the Remote Network Setting, and then enter the Remote Network Address, and Remote Subnet Mask information. 7 When the PPTP Type Setting is set to PPTP Client, you would then need to enter the Pre-shared Key information. 8 Click Apply.