AIWA NSX-V70 Operating Instructions - Page 46
Microphone, Mixing
View all AIWA NSX-V70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
1 4 MIC a'""' MIN. Q . MAX 5 DIGITAL -'Ho MIN* @ q MAX MICROPHONE MIXING Two microphones (not supplied) can be connected to this unit, allowing you to sing along to music sources. Use a microphone with a mini plug (a3.5 mm, l/E inch). Before connecting a microphone Set the MIC MIXING control to MIN. 1 Connect your microphone to the MIC jack. 2 Press one of the function buttons to select the source to be mixed, and play the source. 3 Adjust the volume and tone of the source. 4 Adjust the microphone volume with the MIC MIXING control. The volume of both microphones is adjusted simultaneously. 5 Adjust the echo with the DIGITAL ECHO control. To record microphone sound mixed with source sound Follow the procedure for recording from the source (pages 34 to 36). The SYNCHRO DUBBING button cannot be used for mixing recording. When not using the microphones Set the MIC MIXING and DIGITAL ECHO controls remove the microphones from the MIC jacks. to MIN and m q When a connected microphone is used, the DSP SURROUND system is automatically canceled. q If the microphone is held too near the speakers, a howling sound may be produced. In this case, hold the microphone away from the speakers, or decrease the sound level using the MIC MIXING control. q If sound through the microphone is extremely loud, it may be distorted. In this case, turn the MIC MIXING control toward MIN. Recommended microphone The use of a unidirectional type microphone is recommended to prevent howling. Contact your local Aiwa dealer for details. 46