Adaptec 5325301728 User Guide - Page 22
Replacing a Serial ATA Card, Shutting Down the Server, Removing the Top Cover
![]() |
UPC - 753253017287
View all Adaptec 5325301728 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Snap Server 4200/4500 Replacing a Serial ATA Card Caution There are static-sensitive electronics inside the unit. Before you handle any parts, make sure you are working at a static-controlled workstation and that you are properly grounded. Shutting Down the Server Caution Shut down the server before you make any repairs. Improper shutdown may lead to loss of data or physical harm. 1 To start the shutdown process, press the power button on the front of the server. The green power LED remains lit until the shutdown process is complete. Do not disconnect the AC power cord while the LED remains lit. 2 After the power LED is off, disconnect the AC power cord(s) and all other cables from the back of the server. 3 The server is heavy. With the help of an assistant, remove the server from the rack to a clean surface with ample room to the front and rear. Removing the Top Cover 1 Remove the top cover of the Snap Server by turning the cover retention screw at the back of the server counterclockwise until it becomes loose. Field Service Documentation 1 Copyright © 2007, Adaptec, Inc. All rights reserved. Information in this document is subject to change without notice and does not represent a commitment on the part of Adaptec or any of its subsidiaries.
![](/manual_guide/products/adaptec-5325301728-user-guide-9ccb3a3/22.png)