Adaptec 5325301728 User Guide - Page 29

Snap Server 4200/4500 Installing the Server into a Rack Note These instructions apply to multiple models; illustrations may vary slightly. Rack Mount Kit Inventory Before installing the chassis on a standard 4-post rack, make sure you have the following items from the rack mounting kit: • 2 small front slide rail stop bracket assemblies (with knurled knobs and "ears") and packet of 4 small screws • 2 slide rail assemblies • Packet of mixed screws (8 shorter screws, 16 longer screws with washers and nuts, and 8 12-24 screws for mounting the rails to the rack) • 4 rail extenders (2 for each slide rail assembly) Front brackets (2) and small screws (4) Rail extenders (4) Slide rail assemblies (2) 8 short screws for attaching inner slider to the chassis; 16 longer screws (with washers and nuts) for attaching extenders to the slide rail assemblies; and 8 12-24 screws for attaching the assemblies to the rack Field Service Documentation 1 Copyright © 2007, Adaptec, Inc. All rights reserved. Information in this document is subject to change without notice and does not represent a commitment on the part of Adaptec or any of its subsidiaries.