Adaptec 5325301728 User Guide - Page 31
Removing the Inner Sliders from the Slide Rail Assemblies, the front.
UPC - 753253017287
View all Adaptec 5325301728 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Snap Server 4200/4500 Series Installing the Server into a Rack Removing the Inner Sliders from the Slide Rail Assemblies 1 Place the slide rail assembly on a flat surface. Slide rail assembly Inner slider 2 Grasp the inner slider and slide it toward the front of the assembly, as shown in the picture below. Release button 3 When the inner slider cannot move any farther, press the release button toward the front. The inner slider comes all the way out of the assembly. 4 Repeat the procedure with the second slide rail assembly. Set both inner sliders aside for now. Later in the procedure, you attach them to the sides of the chassis. Field Service Documentation 3 Copyright © 2007, Adaptec, Inc. All rights reserved. Information in this document is subject to change without notice and does not represent a commitment on the part of Adaptec or any of its subsidiaries.