Adaptec 5325301728 User Guide - Page 39

Snap Server 4200/4500 Series Installing the Server into a Rack 3 Attach 4 of the shorter screws (as shown in the illustration above) and tighten them firmly. 4 Repeat the steps to attach the inner slider to the other side of the chassis. Mounting the Chassis onto the Rack Caution The chassis with disk drives inserted weighs 27 pounds. To avoid accidents, have another person help you support the weight of the chassis as you slide it into the rack. 1 Align the inner sliders (attached to the chassis) with the front ends of the slide rail assemblies (attached to the rack). 2 As you push the chassis into the rack, on the slide rails, pull the release buttons on the inner sliders. The release lets the inner sliders past a locking detent. 3 Tighten the screws that attach the ear brackets to the rack. Field Service Documentation 11 Copyright © 2007, Adaptec, Inc. All rights reserved. Information in this document is subject to change without notice and does not represent a commitment on the part of Adaptec or any of its subsidiaries.